No shipping required

COBB Stage 2 Carb Power Package FMIC & Intake with AccessPORT & CFM Breather for 2013-14 Focus ST/ST250

Brand: COBB
Price: $2,670.00
No shipping required

Please contact us to check on availability.

FREE SHIPPING available via UPS Ground to 48 contiguous states. Please contact us for possible shipping discount using a different shipping method or to any other location.
Product Details
The Stage 2 Power Package for the Ford Focus ST is the best second level for the Ecoboost powered vehicle. During exhaustive testing, the COBB engineers found that heat, not necessarily airflow, was the biggest restriction to power on the platform. As such, they married a Front Mount Intercooler which is 57% larger to a 3" mandrel bent cold air intake. This setup cools temps as much as 100 degrees, and produces significant power. Everything is tuned right out of the box with the Accessport and pre-installed maps. The Stage 2 Power Pack has gains of 14% HP and 15% LB-FT on 93 octane.

• COBB Accessport V3
• Rear Engine Mount
• CFM Baffled Billet Valve Cover Breather Kit
• Intake System
• FMIC (Front Mount Intercooler)
• COBB Vehicle Badge: Custom chrome emblem; individual letters with 3D curvature included!

Stock Focus ST evaluation
• Extremely conservative safety oriented limiters and heat management strategies
• Excessive use of torque truncation and power-robbing compensations
• Torque-based targeting versus traditional boost or loadbased targets
• Drive-by-wire throttle closures make up for poor calibration
• Summary: Conservative, inconsistent power delivery

Stage 1 AccessPORT V3
• All reverse engineering and calibration done in-house with our COBB shop vehicles and personal test mules
• Extensive table discovery, testing, and analysis to ensure maximum impact through calibration
• Continual R&D to ensure optimized performance delivered as new discoveries are made
• Tuned for driveability, horsepower and torque improvements in all driving conditions – not just WOT

Stage 1 Rear Engine Mount

The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique "voids” custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount with zinc hardware will make you sad you have to hide it under your car, but you will be grinning at every stop light!

• Machined out of 6061 Billet Aluminum
• Laser Etched COBB Logo
• Unique Molded Voids to Absorb Vibration
• 85A Durometer Bushing
• Reduce Engine Movement
• Improve Traction and Minimize Wheel Hop

CFM Baffled Billet Valve Cover Breather Kit
CFM Performance now makes it easy to vent the crankcase on your 2013 Focus ST with our new billet valve cover baffled breather kit. This kit is a direct replacement for your factory oil fill cap and allows unwanted crankcase pressure to exit.

This breather is the ONLY one in the market which incorporates a check ball to keep unmetered air from coming through while the crankcase is under vacuum. In other words, this breather acts just like a factory oil cap under normal driving conditions and when you get into boost it will release any crankcase pressure present.
The proprietary internal baffle keeps oil particles away from the breather element. The filter element is washable and has a variety of top finishes for great looks. Although this kit was designed for use in racing applications, it works and looks great in any engine compartment.

Stage 2 Air Intake

• Maintains factory airbox and sensor housing

– OEM airbox promotes heat rejection

– Not suited for open element

– Replace OEM filter with dual-cone, open end, washable interwoven cotton filter

• Replace entire intake tract from sensor housing to turbo with 3”, mandrel bent aluminum, wrinkle finish

• Custom silicone couplers for perfect fitment

• Paint matching Cobb die cut decals

Stage 2 Front Mount Intercooler
• 24” x 8” x 3.5” bar and plate core. Cast end tanks
• Mandrel bent 2.5” aluminum tubing (2 pipes total)
• No cutting required
• Up To 100F temperature delta between factory and COBB
• Requires removal of factory grill shutter system
• Maintains factory crash bar

Stage 2 Cat-Back Exhaust
• Part of the COBB Focus ST Stage 2 Carb Package
• Ready to run with COBB OTS Maps
• 3" 304 Stainless Steel
• Dual 4" Slash Cut Tips
• Custom Inline Mufflers
• CNC Mandrel Bent Tubing
• TIG Welded 

Cobb Stage 2 Focus ST evaluation
• The ultimate package in Focus ST modifications
• Aggressive, but safe calibration
• Gains of 14% HP and 15% LB-FT to the wheels on standard 93 octane
• Consistent power delivery from charge air cooling
• Enhanced sensory feedback from the turbo and bypass valve through the intake
• Total install time: 4hrs

Product Reviews
Rate this product:  1   2   3   4   5 

Find Additional Savings When you sign up for our newsletter

Top best live chat