Turbocharged, high stress 4 cylinder engines like the 1.6L EcoBoost engine in the Fiesta ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-to- liquid heat exchanger, the engine can still run very hot and run the risk of overheating the engineâ€™s coolant as well. Aggressive tunes and some track miles can significantly overheat your oil and wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution for your Fiesta ST!
Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was designed to bypass the stock liquid to liquid oil cooler in order to get the best possible oil temperature reduction. A new CNC center bolt and aluminum coolant bypass tube are provided to easily eliminate the stock oil cooler unit. Application specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 35Â°F (19.5Â°C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can withstand the stresses of the most extreme applications.
This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.
Direct-fit for the 2013+ Ford Fiesta STReduces oil temperatures by 35Â°F (19.5Â°C)Minimal pressure dropApplication-specific mounting bracketsOil cooler location does not interfere with aftermarket air intakesWorks with stock and all aftermarket front mount intercooler kitsPre-made stainless steel braided oil lines with durable -AN fittingsBillet aluminum oil sandwich plate19-row stacked-plate oil cooler for optimal fluid temperature reductionThermostatic and Non-thermostatic options availableCooler available in either Sleek Silver or Stealth BlackIncreases oil capacity by 0.65qtThis oil cooler kit retains the use of your stock liquid to liquid oil cooler unitMishimoto Lifetime Warranty
Increase in Oil Capacity
.65 Quarts (0.62L)
(3) Application Specific Mounting Brackets and Spacer
(1) 19 Row Oil Cooler (Silver or Black)
(1) 4 ft, 1 in Stainless Steel Braided Hose with 90 Degree -10AN Fittings
(1) 3 ft, 2.5 in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings
(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)
(1) Application-Specific Â¾ x 16 Stainless Steel Sandwich Plate Adapter
(1) Aluminum Coolant Bypass Tube
(2) M20 x -10AN Straight Fittings
(2) 1 ft Length of Thermal Reflective Wrap
(1) Mounting Hardware Set
This oil cooler kit is designed to work without your stock liquid to liquid oil cooler unit. This kit cannot be installed in conjunction with the stock oil cooler.
Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.